Endura CoatingsLiquid Ceramic Coatings Performance Factors
Series 700
For Ferrous & Non-Ferrous Metals
Specific Performance Factors
- Endura® 701
- Coating Thickness - 0.001" up to 0.006" per surface
- Maximum Continuous Operating Temp. - 500 F
- Color - Purple
- 5% Salt Spray (ASTM B117) - Up to 1,000 Hrs.
- Pencil Hardness (ASTM D3363) - 7H
- Scratch Hardness (ASTM D3363) - 4H
- Adhesion Cross-Cut Tap (ASTM D3359) - 4B
- Mandrel Bend (ASTM D522) - Up to 180° rotation; 1/4" mandrel
- Impact (ASTM D2794) - 160 / 160 inch-lbs
- Endura® 704
- Coating Thickness - 0.001" up to 0.003" per surface
- Maximum Continuous Operating Temp. - 400 F
- Color - White
- Dielectric Strength (V/mil) - 3,000 volts (per 0.001")
- Pencil Hardness (ASTM D3363) - 8H
- Scratch Hardness (ASTM D3363) - 7H
- Adhesion Cross-Cut Tap (ASTM D3359) - 5B
- Mandrel Bend (ASTM D522) - No coating loss with 180° rotation
- Impact (ASTM D2794) - 160 / 160 inch-lbs
- Endura® 710
- Coating Thickness - 0.001" up to 0.003" per surface
- Maximum Continuous Operating Temp. - 2,000 F
- Color - Black
- 5% Salt Spray (ASTM B117) - 1,051 Hrs
- Pencil Hardness (ASTM D3363) - 7H
- Scratch Hardness (ASTM D3363) - 6H
- Adhesion Cross-Cut Tap (ASTM D3359) - 5B
- Mandrel Bend (ASTM D522) - 2mm at 180° rotation
- Impact (ASTM D2794) - 72 / 20 inch-lbs
Please complete our Coating Requirement Questionnaire
or call us
at 1.800.336.3872 to review & discuss your project requirements.
