|
|
|
|
| |
Anodic & Composite Hard Coating Ceramics
Series 100
For Non-Ferrous Alloys; such as Aluminum, Magnesium & their Alloys » |
|
| |
Imparts hardness (to 65Rc), lubricity, excellent resistance to wear and corrosion, high dielectric strength, and excellent release properties.
|
|
| |
Autocatalytic ('Electroless') Nickel & Composite
Plating
Series 200
For Ferrous Metals & Non-Ferrous Alloys (including Aluminum but not limited
to)» |
|
| |
Excellent resistance to wear and abrasion, increased hardness (to 80Rc), low coefficient of friction, permanent lubricity, and good release properties.
|
|
| |
Advanced Polymer Coatings
Series 300
For Ferrous & Non-Ferrous Metals, Plastics or Glass
» |
|
| |
Surface coatings are engineered to provide maximum release (non-stick), durability, corrosion and chemical resistance, and low friction properties.
|
|
| |
Advanced Dry Film Lubricant Coatings
Series 400
For Ferrous & Non-Ferrous Metals and their Alloys »
|
|
| |
Coatings are designed to prevent wear, galling, corrosion resistance and provide excellent dry film lubrication, even at high temperatures.
|
|
| |
Vapor Hard Thin Film Coatings
Series 600 + PURE
For Ferrous & Non-Ferrous Metals & their Alloys
» |
|
| |
Ultra-hard (to 90Rc), thin film, enhanced PVD (Physical Vapor Disposition) coatings provide superior resistance to wear, abrasion, corrosion and enhanced non-stick properties.
|
|
| |
Thermal Spray Composite Coatings
Series 900
For Ferrous & Non-Ferrous Metals and their Alloys » |
|
| |
Permanent non-stick performance with superior resistance to wear and abrasion; our proprietary composites utilize the most advanced material reinforcements available in thermal spray technology today. Coatings achieve metallurgical or mechanical bond strength for surface synergies not previously attainable in release, lubrication, low friction, hardness, wear, heat transfer and other properties.
|
|
| |
M1
Series 1000
For most Ferrous & Non-Ferrous Metals »
|
|
| |
Patented synergistic system conforms to all surfaces, combining thermal-chemical cleaning, surface conversion, and the timed, controlled diffusion of sub-micron, ultra-hard particulates for the most advanced, wear-hardened structural reinforcement physically attainable. Vacuum-impregnated matrices are infused with special high-release lubricating particles for remarkably low surface energy.
|
|
| |
Composite Diamond Coatings
Series 1100
For Most Ferrous & Non-Ferrous Metals »
|
|
| |
Patented, unique technology for diamond integration throughout a proprietary autocatalytic nickel alloy. The ingenuity of the matrix is in its perfection of wear & abrasion, particle size, geometry and dispersion, to create the physical properties of diamond, the hardest material known, on all conforming surfaces and most alloys. Nano-composites are available for precision lower builds; higher CDC is attainable to 0.010 inch, with sustainable properties.
|
|
|
|
|
 |
Extreme Wear Resistance |
|
|
Lowest Friction Attainable |
|
|
Corrosion Resistant |
|
|
High Release (Non-stick) |
|
|
Ultra-Hard Surface Conversions |
|
|
Permanent Dry Lubrication |
|
|
Chemical Protection |
|
|
Non-Wetting |
|
|
FDA, USDA & NSF Approved |
|
|
ISO 9001 : 2000 Certified |
|
|
|
|
|
 |
|
|
|
|
|
|
| Endura® Coatings application engineers will assist you in determining the best
coating chemistry for your application. |
|
Fax  |
|
 or call 800-336-3872 |
|
|
|
|
(586) 739-0101 
