Diamond Coating Processing Factors
For Most Ferrous & Non-Ferrous Metals
Coating Thickness
Diamond Coatings or M1 Composite Coatings consist of both diffusion and conformal precision surface growth (typically between 0.0005 and 0.003 inch, although lower and higher growths are also attainable). To ensure dimensional integrity after coating, you must allow for surface growth in your machining. Endura® will submit coating thickness values during the design phase, when requested.
Base Metal Surface Requirements
Surface contamination and imperfections must be removed prior to processing at Endura® Coatings. Based on the extreme coating uniformity, any surface irregularities before coating will remain after coating.
Masking
Series 1000 or M1 Composite Coatings have the capability of entire surface coverage, including blind holes, recessed areas and any complex surface geometry. Masking should be clearly noted on your prints or corresponding documentation if required.
- Extreme Hardness
(95+ Rc) - Superior Wear & Impact Strength
- Remarkably Low Surface Energy
- High Release Rates (Non-
Stick) - Outstanding Non-Wetting
- Excellent Dry Lubrication
- Conforms to Any Complex Geometry
- Unique Surface Patterns
Available
- Precision Coverage of
Blind Holes or Recessed Areas - Permanent Wear-
Hardened Surfaces - Unique Thermal Transfer
- Chemical & Corrosion Resistant
- Low or High Build
Dimensional Growth - Create & Lock In Any
Gloss Level - FDA Compliant & USDA Approved
Endura® Coatings application engineers will assist you in determining the best coating chemistry for your application.
- Submit on-line
- Fax
Submit Specs
Download fax form- or call 800-336-3872
